Effect of sodium/calcium hypochlorite on adhesion and adaptation of fiber posts luted with a dual resin cement

Abstract This study aimed to evaluate the effect of different concentrations of sodium hypochlorite (NaOCl) and calcium hypochlorite [Ca(OCl)2] on the bond strength and adaptation of glass fiber posts luted with a dual-curing resin cement. Fifty decoronated premolars were sectioned 14 mm from the apex and endodontically treated. The root canal filling was partially removed. The specimens were divided into 5 groups (n=10) according to the irrigant for post space irrigation: 0.9% sodium chloride (NaCl), (control); 2.5% NaOCl; 5.25% NaOCl; 2.5% Ca(OCl)2; and 5.25% Ca(OCl)2. For each group, irrigation was performed with 5 ml of solution. Afterward, the posts were luted with a dual-curing resin cement. One slice from each third was obtained and submitted to the push-out test and failure modes analysis. An additional slice from the middle third was submitted to confocal images for analysis of adaptation failures (gaps). Two-way ANOVA, Tukey's post-hoc, Kruskal-Wallis with Bonferroni adjusted, and chi-square tests, analyzed data. The group treated with 5.25% NaOCl showed lower bond strength values and generated more cohesive failures compared to the control (p < 0.05). Bond strength decreased from coronal to apical in the post space (p < 0.001). The groups treated with NaOCl had the highest percentages of gaps compared to the control (p < 0.05). Regardless of concentration, Ca(OCl)2 did not influence the bond strength and the occurrence of gaps (P > 0.05). Ca(OCl)2 is a good option for irrigating the post space before luting a fiber post with a dual-curing resin cement.

Resumo Este estudo teve como objetivo avaliar o efeito de diferentes concentrações de hipoclorito de sódio (NaOCl) e hipoclorito de cálcio [Ca(OCl)2] na resistência de união e adaptação de pinos de fibra de vidro cimentados com um cimento resinoso dual. Cinquenta pré-molares tiveram suas coroas removidas, foram seccionados a 14 mm do ápice e tratados endodonticamente. A obturação do canal radicular foi parcialmente removida. Os espécimes foram divididos em 5 grupos (n=10) de acordo com o irrigante para irrigação do espaço do pino: cloreto de sódio 0.9% (NaCl), (controle); NaOCl 2.5%; NaOCl 5.25%; Ca(OCl)2 2.5%; e Ca(OCl)2 5.25%. Para cada grupo, a irrigação foi realizada com 5 ml da solução. Posteriormente, os pinos foram cimentados com um cimento resinoso dual. Uma fatia de cada terço foi obtida e submetida ao teste push-out e análise dos modos de falha. Um corte adicional do terço médio foi submetido a imagens confocais para análise de falhas de adaptação (gaps). Os dados foram analisados pelos testes ANOVA de duas vias, post-hoc de Tukey, Kruskal-Wallis com ajuste de Bonferroni e qui-quadrado. O grupo tratado com NaOCl 5.25% apresentou menores valores de resistência de união e gerou mais falhas coesivas em relação ao controle (p < 0.05). A resistência de união diminuiu de coronal para apical no espaço do pino (p < 0.001). Os grupos tratados com NaOCl apresentaram os maiores percentuais de gaps em relação ao controle (p < 0.05). Independentemente da concentração, o Ca(OCl)2 não influenciou a resistência de união e a ocorrência de gaps (P > 0.05). O Ca(OCl)2 é uma boa opção para irrigar o espaço do pino antes de cimentar um pino de fibra com um cimento resinoso dual.

The effects of TiO2 nanotubes on bond strength and radiopacity of a self-adhesive resin cement in self-curing mode / Os efeitos de nanotubos de TiO2 na resistência de união e radiopacidade de um cimento resinoso auto-adesivo no modo auto-polimerizável

Objective: The aim of this in vitro study w as t o analyze the influence of the titanium dioxide nanotubes i n a self-cure mode polymerization of a dual resin luting agent through push out bond strength and radiopacity tests. Material and Methods: After mixed with a commercial du al self-adhesive resin cement, three concentrations o f tit anium dioxide nanotubes (0.3, 0.6, and 0.9% by weight) we re analyzed in self-curing mode. T he bond strength to bovine root dentin and fi berglass posts was assessed with the push out bond str ength t est and was evaluated in three thirds (cervical, middle and apical) (n=10), followed by failure mode analysis (SEM), and the ISO standard 9917-2 was followed for radiopacity test (n=10). Data were statistically analyzed by one-way ANOVA test, followed by Tukey's test (α=0.05). Results: Reinforced self-adhesive resin cement with 0.6% titanium dioxide nanotubes showed significant difference compared to the control gr oup for push out test (p=0.00158). The modified groups did not s how significant difference among thirds (p=0.782). Radiopacity sh owed higher value for group w ith 0.9% titanium dioxide nanotubes in comparison w ith control group (p<0.001). Conclusion: The addition of titanium dioxide nanotubes to a self-adhesive resin cement increased the bond strength to dentin and radiopacity values in the self-cure polymerization mode (AU)

Objetivo: O objetivo deste estudo in vitro foi analisar a influência de nanotubos de dióxido de titânio na polimerização química de um agente cimentante resinoso dual através de testes de resistência à união e radiopacidade. Material e Métodos: Após misturado com um cimento resinoso auto-adesivo comercial, três concentrações de nanotubos de dióxido de titânio (0,3, 0,6 e 0,9% em peso) foram analisadas. A resistência da união para a dentina da raiz bovina e os pinos de fibra de vidro foi avaliada pelo teste de push-out e avaliada em três terços (cervical, médio e apical) (n = 10), seguido pelo análise de modo de falha (MEV) e a norma ISO 9917-2 foi seguido para teste de radiopacidade (n = 10). Os dados foram analisados estatisticamente pelo teste ANOVA um fator seguido do teste de Tukey (α = 0,05). Resultados: O cimento resinoso auto-adesivo reforçado com nanotubos de dióxido de titânio a 0,6% mostrou diferença significativa em comparação com o grupo controle para teste de push-out (p=0,00158). Os grupos modificados não mostraram diferença significativa entre os terços (p=0,782). A radiopacidade mostrou maior valor para o grupo com nanotubos de dióxido de titânio 0,9% em comparação com o grupo controle (p<0,001). Conclusão: A adição de nanotubos de dióxido de titânio a um cimento resinoso auto-adesivo aumentou a os valores de resistência de união à dentina e radiopacidade no modo de polimerização química do agente cimentante (AU)

Do irrigation solutions used during root canal instrumentation influence the adhesion of glass fiber posts? A systematic review / As soluções de irrigação usadas durante a instrumentação do canal radicular influenciam a adesão de pinos de fibra de vidro? Uma revisão sistemática

Statement of problem: the bond strength between adhesive cement and root dentin can be affected by irrigation protocols. Purpose: therefore, the objective of this systematic review was to answer the following question: Do irrigation solutions used during root canal instrumentation influence the adhesion of glass fiber posts to root dentin? Material and Methods: this study followed the recommendations of PRISMA 2020 for writing. PubMed, Scopus, Web of Science, and LILACS databases were searched for articles published until 26 January, 2022. Grey literature and a manual search were also performed. The inclusion criteria were based on the PICO strategy: permanent human or animal teeth (P), which were irrigated during root canal instrumentation with endodontic substances (I) and compared to irrigation with sodium hypochlorite at various concentrations (C) to analyze the bond strength of glass fiber posts (O). Two authors independently performed data extraction and the risk of bias. Results: eight articles were included. Four articles were classified as having a high risk of bias, where the others as medium risk. Studies have reported conflicting results regarding the influence of irrigating solutions and the different concentrations of sodium hypochlorite on the adhesion of glass fiber posts to root dentin. Conclusion: the heterogeneity between studies did not allow the conclusion of a true estimate regarding this topic, and further well-designed studies are needed to clarify this issue. Register: CRD42020221835. (AU)

Definição do problema: a resistência de união entre o cimento adesivo e a dentina radicular pode ser afetada pelos protocolos de irrigação. Objetivo: portanto, o objetivo desta revisão sistemática foi responder à seguinte questão: As soluções de irrigação usadas durante a instrumentação do canal radicular influenciam a adesão de pinos de fibra de vidro à dentina radicular? Material e Métodos: este estudo seguiu as recomendações do PRISMA 2020 para sua redação. As bases de dados PubMed, Scopus, Web of Science e LILACS foram pesquisadas para artigos publicados até 26 de janeiro de 2022. A literatura cinza e uma pesquisa manual também foram realizadas. Os critérios de inclusão foram baseados na estratégia PICO: dentes humanos ou animais permanentes (P), que foram irrigados durante a instrumentação do canal radicular com substâncias endodônticas (I) e comparados à irrigação com hipoclorito de sódio em várias concentrações (C) para analisar a resistência de união de pinos de fibra de vidro (O). Dois autores realizaram independentemente a extração de dados e o risco de viés. Resultados:oito artigos foram incluídos. Quatro artigos foram classificados como de alto riscode viés, enquanto os demais como de médio risco. Estudos relataram resultados conflitantes sobre a influência de soluções irrigadoras e as diferentes concentrações de hipoclorito de sódio na adesão de pinos de fibra de vidro à dentina radicular. Conclusão: a heterogeneidade entre os estudos não permitiu a conclusão de uma estimativa verdadeira sobre este tópico, sendo necessários mais estudos bem delineados para esclarecer esta questão. Registo: CRD42020221835 (AU)

The Use of Fiber-Reinforced Composites for Restoration of Endodontically Treated Teeth: A Review

@#This review summarized the most recently published literature pertaining to the use of fiber-reinforced composite (FRC) to restore endodontically treated teeth (ETT) and its influence on the mechanical behavior of restored teeth. Indepth¬ literature review in Google Scholar, ScienceDirect and PubMed was performed for these keywords: “fiber-reinforced composite”; “fiber post”; “endodontically treated”; “short fiber-reinforced composite”— only published fulltext articles between 2009 and 2021 are included in this review. Fourteen articles were selected for this review. The studies concentrated on laboratory-based research conducted on human and bovine extracted teeth with different restorative techniques. Fatigue survival and load to failure tests with assessment of survival rate and fracture strength values respectively, as well as fracture pattern analysis were done. We concluded that FRC materials have improved fracture strength of restored teeth compared to conventional composites using different restorative techniques, however not to the attained level of an intact natural tooth. In addition, authors recommend a better simulation of oral environment, such as dynamic fatigue-testing.

Effect of bioceramic root canal sealers on the bond strength of fiber posts cemented with resin cements

Abstract This study aimed to evaluate the influence of calcium silicate-based sealers on the bond strength of fiber posts using conventional and self-adhesive resin cement. Sixty single-rooted teeth were selected. The canals were prepared with a reciprocating instrument 40.06. The roots were randomly distributed in six groups (n = 10) according to the strategies for root canal filling and fiber posts cementation: AH Plus/RelyX ARC; AH Plus/RelyX U200; Bio C Sealer/RelyX ARC; Bio C Sealer/RealyX U200; Sealer Plus BC/RelyX ARC; and Sealer Plus BC/RelyX U200. The roots were transversally sectioned, and one slice per post-third was obtained. The push-out test was performed at a crosshead speed of 1mm/min. The failure patterns were described after assessment with a stereomicroscope with a 10× magnification. Bond strength was calculated and analyzed using the ANOVA and Tukey test. AH Plus did not influence the bond strength of fiber posts cemented with conventional (RelyX ARC) or with self-adhesive resin cement (RelyX U200). The lowest bond strength values were obtained when calcium silicate-based sealers were associated with conventional resin cement (Bio C Sealer/RelyX ARC and Sealer Plus BC/RelyX ARC). Except for Sealer Plus BC/RelyX ARC, all groups presented lower bond strength at the apical portion compared to the cervical portion of the post. Adhesive failures between cement and post and cement and dentin were predominant (55.3%). Calcium silicate-based sealers decreased the bond strength of fiber posts cemented with conventional resin cement.

Resumo Este estudo teve como objetivo avaliar a influência de cimentos à base de silicato de cálcio na resistência de união de pinos de fibra utilizando cimentos resinosos convencionais e autoadesivos. Sessenta dentes humanos monorradiculares foram selecionados. Os canais foram preparados um instrumento reciprocante 40.06. As raízes foram distribuídas aleatoriamente em seis grupos (n = 10) de acordo com as estratégias de obturação do canal e cimentação dos pinos de fibra: AH Plus/RelyX ARC; AH Plus/RelyX U200; Bio C Sealer/RelyX ARC; Bio C Sealer/RealyX U200; Sealer Plus BC/RelyX ARC; e Sealer Plus BC/RelyX U200. As raízes foram seccionadas transversalmente e foi obtido um espécime por terço. O teste de push-out foi realizado em uma velocidade de 1mm/min. Os padrões de falha foram descritos após avaliação em estereomicroscópio com aumento de 10×. A resistência de união foi calculada e analisada por ANOVA e teste de Tukey. AH Plus não influenciou na resistência de união dos pinos de fibra cimentados com cimento resinoso convencional (RelyX ARC) ou autoadesivo (RelyX U200) (p > 0,05). Os menores valores de resistência de união foram obtidos quando os cimentos à base de silicato de cálcio foram associados ao cimento resinoso convencional (Bio C Sealer/RelyX ARC e Sealer Plus BC/RelyX ARC) (p < 0,05). Com exceção do Sealer Plus BC/RelyX ARC, todos os grupos apresentaram menor resistência de união na porção apical em comparação com a porção cervical do pino (p < 0,05). Falhas adesivas entre cimento e pino e cimento e dentina foram predominantes (55,3%). Cimentos a base de silicato de cálcio diminuíram a resistência de união de pinos de fibra cimentados com cimento resinoso convencional.

Application prospect of polyetheretherketone in postcore crown restorations / 口腔疾病防治

@#Polyetheretherketone (PEEK) is known as a high-grade engineering plastic with good mechanical properties, chemical stability and biocompatibility. Currently, PEEK materials have been widely used in prosthodontics, such as complete dentures and removable partial dentures. The relevant research shows that PEEK posts are superior to glass fiber posts, which have high tensile bond strength and bending strength. At present, few case reports of PEEK postcores have been published, and clinical case reports suggest that PEEK postcores have good oral prosthetic aesthetics and are ideal and reliable postcore crown materials. However, the preparation and surface treatment methods of PEEK require further refinement. A review of the related properties of PEEK and the prospects of its application in the field of postcore crown restoration will be presented in this paper.

Estudio microtomográfico de la porosidad en la cementación de postes de fibra / Microtomographic study of the porosity in the cementation of fiber posts

El objetivo de este estudio fue evaluar con microto-mografía los poros existentes entre el cemento de resina, poste de fibra y paredes del conducto en los distintos tercios radiculares en premolares inferio-res. Se utilizaron 15 premolares inferiores unirra-diculares humanos recientemente extraídos. Se les realizó el tratamiento endodóntico, y se obturó con conos de gutapercha y cemento endodóntico a base de resina. Una vez desobturados se procedió a la ce-mentación de los postes. Cada muestra se posicionó en un accesorio personalizado y se escaneó utilizan-do un Microtomógrafo. Con el software CTAn v.1.12 (Bruker-microCT) se analizaron las microtomografías para obtener el volumen de interés (VOI) que permi-tió calcular el área de superficie (mm2) y volumen de cada poro (mm3) entre la dentina y el poste a nivel co-ronal, medio y apical. Los datos fueron analizados me-diante las pruebas estadísticas de Friedman o ANOVA de medidas repetidas. El volumen de los poros entre los tres tercios radiculares mediante la prueba de Friedman, encontró una diferencia global significativa (F = 30,00; p < 0,05). El tercio en donde los poros presentaron un mayor volumen (mm3) fue el tercio coronal (mediana: 0,29250), seguido por los tercios medio (mediana: 0,03200), y apical (mediana: 0,00140). La comparación de la superficie de los poros entre los 3 tercios brindó un resultado análogo al de la comparación del volumen. La mayor superficie (mm2) correspondió al tercio coronal (media ± DE = 1,66377 ± 0,27175), seguido por los tercios medio (media ± DE = 1,16210 ± 0,20343) y apical (media ± DE = 0,41074 ± 0,12641). La microtomografía permitió realizar un análisis cuantitativo y cualitativo de los poros en toda la muestra, sin deterioro de la misma. Se puede concluir que el tercio coronal presenta más poros que el tercio apical con la técnica de cementación utilizada. En cuanto a la superficie y volumen de los poros, los resultados encontrados son similares a los reporta-dos por diversos autores (AU)

The aim of this study was to evaluate with microtomography the existing pores between the resin cement, fiber post and canal walls in the different in thirds of the canal, in single-root lower premolars. Fifteen recently extracted human single root lower premolars were used, endodontically treated, and filled with gutta-percha cones and resin-based endodontic cement. Once unfilled, the posts were cemented. Each sample was positioned on a custom fixture and scanned using a Microtomograph. Each sample was evaluated using CTAn v.1.12 software (Bruker-microCT) to obtain the surface area (mm2), volume of interest (mm3) of each pore between dentin and post at the coronal, middle and apical levels. Data were analyzed using Friedman's tests or repeated measures ANOVA. The volume of the pores between the three root thirds using the Friedman test, a significant global difference was found (F = 30.00; p < 0.05). The third in which the pores presented a greater volume (mm3) was the coronal third (means: 0.29250), followed by the middle (means: 0.03200) and apical (means: 0.00140) thirds. The comparison of the pore surface between the 3 thirds gave an analogous result to that of the volume comparison. The largest surface area (mm2) corresponded to the coronal third (mean ± SD 1.66377 ± 0.27175), followed by the middle (mean ± 1.16210 ± 0.20343) and apical (mean ± 0.41074 ± 0.12641) thirds.Microtomography allowed a quantitative and qualitative analysis of the pores in the entire sample without deterioration. It can be concluded that the coronal third has more pores than the apical third with the cementation technique used. Regarding the surface and volume of the pores, the results found are similar to those reported by various authors (AU)

Evaluation of The Cleaning Protocol of Post Space on Bond Strength of Glass Fiber Posts

ABSTRACT: This study aimed to compare the effect of four irrigation solutions for post space cleaning on the bond strength between glass fiber post and root dentine. Forty bovine roots were root-filled and randomly divided into four groups (n=10), according to the irrigation solution: CG (Control Group): saline solution; SH (Sodium Hypochlorite Group); CLX (Chlorhexidine group) and EDTA (ethylenediaminetetraacetic acid group). Specimens were submitted to mechanical aging and push-out test. Statistical analysis (ANOVA two-way and Tukey test; p<0.05) was performed. A stereomicroscope was used for failure mode classification. EDTA showed higher bond strength values, differing statistically from SH and CG (p<0.05). Adhesive failure between dentin and resinous cement was predominant, followed by mixed failures. SEM images showed pronounced smear layer removal in the EDTA group. 17 % EDTA was better than other solutions for cleaning of post space when using glass fiber posts.

RESUMEN: Este estudio tuvo como objetivo comparar el efecto de cuatro soluciones de irrigación para la limpieza del espacio del poste sobre la fuerza de unión entre el poste de fibra de vidrio y la dentina radicular. Se rellenaron cuarenta raíces bovinas y se dividieron aleatoriamente en cuatro grupos (n = 10), según la solu- ción de riego: CG (Grupo Control): solución salina; SH (Gru- po de hipoclorito de sodio); CLX (grupo clorhexidina) y EDTA (grupo ácido etilendiaminotetraacético). Las muestras se sometieron a una prueba de envejecimiento mecánico y de expulsión. Se realizó análisis estadístico (ANOVA bidireccional y prueba de Tukey; p <0,05). Se utilizó un microscopio estereoscópico para la clasificación del modo de falla. EDTA mostró valores de fuerza de unión más altos, difiriendo estadísticamente de SH y CG (p <0,05). Pre-dominó la falla adhesiva entre dentina y cemento resinoso, seguida de fallas mixtas. Las imágenes SEM mostraron una eliminación pronunciada de la capa de frotis en el grupo de EDTA. El EDTA al 17 % fue mejor que otras soluciones para la limpieza del espacio de los postes cuando se utilizan postes de fibra de vidrio.

Evaluation of stress in three different fiber posts with two-dimensional finite element analysis

Introduction: The primary function of corono-radicular post is to provide retention for the core and to reinforce and to replace the remaining coronal tooth structure. There is considerable controversy regarding optimal choice of the material. An ideal post system should exhibit fracture resistance higher than the average masticatory forces. Finite elemental analysis (FEA) method facilitates precise analysis of the distribution and magnitude of stresses at any point of complex and irregular structures. Thus, this FEA study has been undertaken to evaluate the fracture stress distribution patterns in three fiber posts, viz., carbon, glass fiber, and everStick with an FEA. Materials and Methods: The FE stress analysis was performed with the FE software program (CATIA). Three two-dimensional FEA models of central incisor were simulated, and elastic moduli and Poisson's ratio of all the materials were fed to the software. For all the models, a 200 N vertical force was applied on the lingual surface of the tooth at an angle of 45°. Stress concentration and distribution were evaluated and noted down for all the models. To evaluate the stresses within the restored tooth, the modified von Mises failure criterion was used. The equivalent stresses found in the tested models were compared with the tensile strength of the respective materials. Contact stresses in the luting cement–dentin interface were calculated. Results: Finite element method revealed that maximum stress concentration was at the point of stress application. The stress value was highest in carbon fiber post followed by glass fiber post and least stresses found in everStick post. Maximum stress was observed at the labial surfaces of crown. However, the stress values and distribution were more homogenous in everStick post. Conclusion: The present findings suggest that everStick post has uniform stress distribution within tooth structure.

Fabrication of guide and removal of fiber post by tetrahedron positioning technology at the chair side: a case report and literature review / 口腔疾病防治

Objective @#To explore the technology and efficacy of fabrication of a guide and removal of a fiber post by tetrahedron positioning technology at the chair side.@*Methods@# For one patient with acute chronic periapical periodontitis of the left maxillary lateral incisor who needed to have the fiber post removed, the chair side tetrahedral positioning technique was used to make a guide plate to remove the fiber post. Cone beam CT (CBCT) data were imported into the software to design the guide plate for fiber post removal. The guide plate design on CBCT was transferred to a solid model by using tetrahedral positioning technology. The guide plate was made to guide the removal of the fiber post, and then left maxillary lateral incisor root canal was performed. We evaluated the effect of fiber post removal with tetrahedral positioning technology by reviewing the literature.@*Results @#The guide plate made by tetrahedral positioning technology can accurately locate the position and direction of fiber posts at a low cost and with high speed. After the fiber post was removed, the root canal could be dredged by using root canal preparation instruments. After root canal preparation, the root canal was filled with warm gutta-percha to complete the root canal treatment. After 3 months, the apical radiograph showed that the transmission shadow of the apical area was reduced. The results of the literature review showed that the fiber post removal with guide plates provides a predictable result and a lower risk of iatrogenic damage. Minimally invasive treatment can be carried out, and chair time can be reduced.@*Conclusion@#On the basis of CBCT data, using tetrahedral positioning technology to make fiber post removal guides can help reduce the risk of fiber post removal and has the characteristics of speed, low cost and short chair side processing. However, the accuracy comparison between tetrahedral positioning technology and 3D printing guides needs further study.

Resistencia adhesiva de postes de fibra a los diferentes tercios del conducto radicular / Adhesive resistance of fiber posts to different thirds of the root canal

En los últimos años resulta de elección la utilización de postes de fib ra en la rehabilitación de piezas endodónticamente tratadas. La adhesión entre poste, agente cementante y dentina radicular permitiría lograr una retención de la estructura dentro de las paredes del conducto. El objetivo de este estudio fue comparar la resistencia adhesiva en los tercios cervical, medio y apical, entre la dentina del conducto radicular y el cemento adhesivo utilizado en la cementación de postes de fibra. Se utilizaron 30 premolares inferiores uniradiculares humanos, recientemente extraídos, se realizaron los tratamientos endodónticos, se desobturaron y realizaron las preparaciones con la fresa conformadora número 3 para la cementación de postes White Post DC especial número 3 con cemento Paracore utilizando el protocolo adhesivo del mismo sistema. Las muestras fueron incluidas en acrílico cristal, cortadas en forma perpendicular al eje mayor de la pieza con una máquina de corte y por último se procedió a medir los valores de adhesión de los postes a la superficie interna de los conductos en los tres tercios con la prueba push-out mediante una máquina de ensayo universal. Los resultados arrojaron que las resistencias (media +- DE, MPa) en los tercios cervical, medio y apical, fueron 8,74 +- 3,12, 9,38 +- 2,29 y 11,11 +- 2,95, respectivamente. En el tercio apical se registró mayor resistencia. Considerando las limitaciones de esta investigación, se puede concluir que la cementación de postes de fibra con cementos resinosos, presenta mayores valores en el tercio apical y menores en el tercio cervical del conducto radicular con técnica de Push-out (AU)

One year clinical evaluation of e-max press crowns retained with fiber reinforced composite post versus e-max press endocrowns in anterior endodontically treated teeth (a randomized clinical trial) / Avaliação clínica de um ano de coroas e-max retidas com resina composta reforçada por fibra versus endocrowns de e-max em dentes anteriores tratados endodonticamente: um ensaio clínico randomizado

Objective: The purpose of this study was to assess patient satisfaction, gross fracture and marginal adaptation of e.max press endocrowns versus e.max press crowns retained with Fiber reinforced composite post (FRCP) and core in upper anterior teeth. Material and methods: The present study included 24 patients seeking root canal treatment in anterior upper arch. The patients received root canal treatment (RCT) then they were randomly assigned into two groups (n=12). The first group received preparation for the IPS e.max crowns retained with FRCP and core and the second group received preparation for the IPS e.max endocrowns. Press technique was used for the fabrication of both restorations using IPS e.max press ingots. Marginal integrity and gross fracture were evaluated using USPHS criteria and a questionnaire was conducted to evaluate patient satisfaction. Data were analyzed using IBM SPSS Statistics for Windows, Version 23.0. Armonk, NY: IBM Corp. Results: There was no statistical significant difference regarding gross fracture of both groups after 12 months (p-value = 0.093, Effect size = 0.447), meanwhile; group 1 was statistically significantly higher than group 2 regarding marginal integrity (p-value = 0.037, Effect size = 0.513). Regarding patient satisfaction FRCP and core group showed statistical significant higher satisfaction than endocrown group (p-value = 0.047, Effect size = 0.447). Conclusion: E.max press endocrowns revealed successful performance similar to e.max press crowns retained with FRCP in terms of gross fracture, however better marginal adaptation and patient satisfaction was obtained with e.max press crowns retained with FRC post and core group. (AU)

Objetivo: O objetivo deste estudo foi avaliar a satisfação do paciente, grau de fratura grosseira e adaptação marginal de endocrowns e.max versus coroas de e.max retidas com pino de compósito reforçado com fibra (FRCP) e núcleo nos dentes anteriores superiores. Material e métodos: O presente estudo incluiu 24 pacientes que buscavam tratamento endodôntico na arcada superior anterior. Os pacientes receberam tratamento de canal radicular (RCT) e foram divididos aleatoriamente em dois grupos (n = 12). O primeiro grupo recebeu preparação para as coroas IPS e.max retidas com FRCP e núcleo e o segundo grupo recebeu preparos para as endocrowns IPS e.max. A técnica de prensagem foi usada para a fabricação de ambas as restaurações usando os lingotes de prensagem IPS e.max. A integridade marginal e a fratura macroscópica foram avaliadas usando os critérios da USPHS e um questionário foi realizado para avaliar a satisfação do paciente. Os dados foram analisados usando IBM SPSS Statistics for Windows, versão 23.0. Armonk, NY: IBM Corp. Resultados: Não houve diferença estatisticamente significativa em relação à fratura bruta de ambos os grupos após 12 meses (p-valor = 0,093, tamanho do efeito = 0,447), entretanto; o grupo 1 foi estatisticamente significativamente maior do que o grupo 2 em relação à integridade marginal (p-valor = 0,037, tamanho do efeito = 0,513). Em relação à satisfação do paciente, o FRCP e o grupo principal mostraram maior satisfação estatisticamente significativa do que o grupo endocrown (p-valor = 0,047, tamanho do efeito = 0,447). Conclusão: as endocrowns E.max press revelaram um desempenho bem-sucedido semelhante às coroas e.max press retidas com FRCP em termos de fratura bruta, no entanto, melhor adaptação marginal e satisfação do paciente foram obtidas com as coroas e.max press retidas com pilar FRC e núcleo de preenchimento (AU)

Resistência de união de pinos de fibra de vidro utilizando diferentes tratamentos radiculares / Resistencia a la unión de postes de fibra de vidrio utilizando diferentes tratamientos endodónticos / Bond strength of glass fiber posts using different endodontic treatments

Resumo Introdução: Os pinos de fibra de vidro têm sido amplamente utilizados na reconstrução de elementos com perda excessiva de estrutura dentária. Objetivo: Avaliar a força de adesão de pinos de fibra de vidro após diferentes tratamentos radiculares em diferentes regiões (terço cervical, médio e apical) da dentina radicular. Métodos: Este é um estudo experimental in vitro. Quarenta dentes bovinos foram selecionados, preparados e distribuídos em quatro grupos de acordo com o tratamento de superfície utilizado: adesivo (1), agente quelante (2), ácido poliacrílico (3), não tratado (4). A cimentação dos pinos de fibra de vidro foi realizada com cimento resinosante autocondicionante. Após vinte dias, cada raiz foi cortada em três fatias (um milímetro de espessura) obtidas de três regiões. A resistência de união de cada seção foi determinada usando um teste de resistência da junta de encaixe. Os dados de resistência à flexão (MPa) foram analisados pelos testes ANOVA e Tukey (α = 0,05). Resultados: Na porção cervical, o grupo com tratamento prévio com ácido poliacrílico apresentou menor resistência ao cisalhamento por extrusão (push-out) do que o grupo sem tratamento prévio. O grupo com aplicação do sistema adesivo (28,89 ± 6,64 MPa) e o grupo com tratamento prévio com EDTA (21,58 ± 6,39 MPa) não apresentaram diferenças estatisticamente significantes em relação ao grupo sem tratamento prévio (grupo controle) no terço cervical. Nas porções média e apical, o grupo tratado com adesivo FGM Ambar apresentou maiores valores de ligação em comparação com os outros grupos. Conclusão: A aplicação prévia do adesivo aumentou a resistência de união nos terços médio e apical, em comparação aos outros grupos, podendo ter um efeito benéfico no sucesso clínico do tratamento restaurador(AU)

Resumen Introducción: Los postes de fibra de vidrio se han utilizado ampliamente en la reconstrucción de elementos con pérdida excesiva de estructura dental. Objetivo: Evaluar la fuerza de adhesión de postes de fibra de vidrio después de distintos tratamientos de raíz en diferentes regiones (tercios cervical, medio y apical) de dentina de raíz. Métodos: Estudio experimental in vitro. Se seleccionaron cuarenta dientes bovinos, se prepararon y se distribuyeron en cuatro grupos de acuerdo con el tratamiento de superficie utilizado: (1) adhesivo, (2) agente quelante, (3) ácido poliacrílico, (4) sin tratar. La cementación de los postes de fibra de vidrio se realizó con cemento de resina autograbante. Después de 20 días, cada raíz se seccionó transversalmente en tres rodajas (1 mm de espesor) obtenidas de tres regiones. La resistencia a la unión de cada sección se determinó usando una prueba de resistencia al corte por extrusión (push-out). Los datos de resistencia a la flexión (MPa) se analizaron mediante pruebas ANOVA y Tukey (α = 0,05). Resultados: En la porción cervical, el grupo con tratamiento previo de ácido poliacrílico mostró menor resistencia que el grupo sin tratamiento previo. El grupo con aplicación del sistema adhesivo (28,89 ± 6,64 MPa) y el grupo con tratamiento previo de EDTA (21,58 ± 6,39 MPa) no presentaron diferencias estadísticamente significativas en comparación con el grupo sin tratamiento previo (grupo control) en el tercio cervical. En las porciones media y apical, el grupo tratado con adhesivo Ambar® de FGM Dental Group mostró valores más altos de unión en comparación con los otros grupos. Conclusión: La aplicación previa del adhesivo aumentó la fuerza de unión en los tercios medio y apical, en comparación con los otros grupos, puede tener un efecto beneficioso sobre el éxito clínico del tratamiento restaurador(AU)

ABSTRACT Introduction: Glass fiber posts have been widely used for the reconstruction of elements with excessive dental structure loss. Objective: Evaluate the bond strength of glass fiber posts after various root dentin treatments in different regions (cervical, middle and apical thirds). Methods: An experimental in vitro study was conducted. Forty bovine teeth were selected, prepared and distributed into four groups according to the surface treatment used: (1) adhesive, (2) chelating agent, (3) polyacrylic acid, (4) not treated. The glass fiber posts were cemented with self-etch resin cement. After 20 days, each root was sectioned crosswise into three slices (1 mm in thickness) obtained from three regions. Bond strength was determined in each section with a push-out bond strength test. Flexural strength data (MPa) were analyzed with ANOVA and Tukey's tests. Results: In the cervical portion, the group with previous polyacrylic acid treatment displayed lower push-out strength than the group without previous treatment. The group with application of the adhesive system (28.89 ± 6.64 MPa) and the group with previous EDTA treatment (21.58 ± 6.39 MPa) did not exhibit any statistically significant differences in comparison with the group without previous treatment (control group) in the cervical third. In the middle and apical portions, the group treated with the adhesive Ambar® of FGM Dental Group showed higher bond values in comparison with the other groups. Conclusion: Previous adhesive application increased bond strength in the middle and apical thirds in comparison with the other groups, and may thus have a beneficial effect on the clinical success of the restorative treatment(AU)

Effect of silver antibacterial agents on bond strength of fiber posts to root dentin

Abstract This study was conducted to evaluate whether antibacterial pretreatment irrigation with silver nanoparticles (SNPs) and silver diamine fluoride (SDF) has any effect on bond strength of fiber posts cemented with three types of resin cements in root canal space. Fifty-four endodontically treated maxillary central incisor roots were prepared for fiber post (FRC Postec Plus NO.3, Ivoclar Vivadent) cementation and divided into nine groups in terms of three cement types and two pretreatments with silver antibacterial agents. The cements were as follows: an etch-and-rinse cement (ER, Excite DSC/Variolink N), a self-etch cement (SE, ED Primer/Panavia F2.0), and a self-adhesive cement (SA, Panavia SA Luting Plus). For each cement, the control group was with no treatment and two experimental groups were with SNPs and SDF treatments that were used after acid-etching for ER cement and after EDTA treatment for SE and SA cements. After fiber post cementation, each bonded root was horizontally sectioned into 1-mm thickness microslices to create two slices for each root region (apical, middle and coronal) and underwent push-out bond strength (PBS) test. Data in MPa were analyzed with two-way ANOVA and Tukey test (p=0.05). The interaction of the pretreatment type and cement type was significant (p<0.001). SNPs and SDF significantly increased PBS with ER cement (p≤0.04). This positive effect was also marginally significant for SDF with SE cement (p=0.049). For SA cement, SNPs showed a significant positive effect, but SDF had a significant adverse effect on PBS (p<0.001). The effect of pretreatment with silver antibacterial agents prior to adhesive cementation of fiber posts depends on the resin cement used. Contrary to SNPs with beneficial or no significant effect on bonding for all cements, SDF exhibited a deleterious effect with self-adhesive cement.

Resumo Este estudo foi conduzido para avaliar se a irrigação de pré-tratamento antibacteriano com nanopartículas de prata (SNPs) e fluoreto de diamina de prata (SDF) tem algum efeito na resistência de união de pinos de fibra cimentados com três tipos de cimentos resinosos no espaço do canal radicular. Cinquenta e quatro raízes de incisivos centrais superiores tratadas endodonticamente foram preparadas para cimentação de pino de fibra (FRC Postec Plus NO.3, Ivoclar Vivadent) e divididas em nove grupos em termos de três tipos de cimento e dois pré-tratamentos com agentes antibacterianos de prata. Os cimentos foram os seguintes: um cimento etch-and-rinse (ER, Excite DSC / Variolink N), um cimento autocondicionante (SE, ED Primer / Panavia F2.0) e um cimento autoadesivo (SA, Panavia SA Luting Plus). Para cada cimento, o grupo controle foi sem tratamento e dois grupos experimentais foram com SNPs e SDF tratamentos que foram usados após o condicionamento ácido para o cimento ER e após o tratamento com EDTA para os cimentos SE e SA. Após a cimentação do pilar de fibra, cada raiz ligada foi seccionada horizontalmente em microclimas de 1 mm de espessura para criar duas fatias para cada região da raiz (apical, média e coronal) e submetida ao teste de resistência de união por push-out (PBS). Os dados em MPa foram analisados ​​com ANOVA de dois fatores e teste de Tukey (p = 0,05). A interação do tipo de pré-tratamento e tipo de cimento foi significativa (p<0,001). SNPs e SDF aumentaram significativamente o PBS com cimento ER (p≤0,04). Este efeito positivo também foi marginalmente significativo para SDF com cimento SE (p = 0,049). Para o cimento SA, os SNPs mostraram um efeito positivo significativo, mas o SDF teve um efeito adverso significativo no PBS (p <0,001). O efeito do pré-tratamento com agentes antibacterianos de prata antes da cimentação adesiva dos pinos de fibra depende do cimento resinoso utilizado. Ao contrário dos SNPs com efeito benéfico ou nenhum efeito significativo na adesão para todos os cimentos, o SDF exibiu um efeito deletério com o cimento autoadesivo.

Preparación Ultrasónica del Espacio Protésico y su Influencia en la Resistencia Adhesiva de Postes de Fibroresina en Conductos Ovalados / Ultrasonic Preparation of the Prosthetic Space and its Influence on the Bond Strength of Fiber Post in Oval-Shaped Canals

RESUMEN: Paredes sin instrumentar y con material obturador endodóntico residual pueden elevar la posibilidad de la falla adhesiva de postes de fibroresina. Las fresas de desobturación y conformación del espacio protésico poseen una sección circular, lo que dificulta una adecuada preparación y limpieza de las paredes de los conductos ovales. El objetivo del presente estudio fue evaluar la capacidad de limpieza ultrasónica del espacio protésico y cómo ésta influyó en la resistencia a la tracción de postes de fibroresina en conductos ovales. Se utilizaron 30 premolares con conducto ovalado divididos aleatoriamente en 3 grupos de estudio (n=10), siendo: grupo A: preparación rotatoria con complemento ultrasónico, grupo B: preparación rotatoria y grupo C: grupo control. Postes de fibra de vidrio fueron cementados y luego de 7 días se realizaron cortes de un milímetro de grosor del tercio cervical y medio de cada muestra y se evaluó microscópicamente el área de gutapercha remanente y área efectiva de adhesión. Estos fueron sometidos a una prueba de push out evaluando la resistencia adhesiva de los postes. Finalmente fueron observados microscópicamente para analizar tipo de falla. Los resultados se analizaron mediante el test de ANOVA, Bonferroni, Kruskal-Wallis y Mann Whitney (p < 0.05), registrando diferencias estadísticamente significativas en la resistencia a tracción, área de gutapercha remanente y área disponible para la adhesión; además de una relación directa entre gutapercha remanente y menor resistencia a la tracción. Conclusiones: La preparación ultrasónica del espacio protésico aumenta la resistencia a la tracción de postes de fibroresinas cementados en conductos ovalados.

ABSTRACT: Untouched canal walls with residual filling materials can increase the probability of adhesive failure of fiber posts. The drills used for desobturation and conformation of the prosthetic space, has a circular cross section, which does not allow a proper preparation and cleaning of oval-shaped canal walls. The objective of the study was to evaluate the ultrasonic cleaning of the prosthetic space and how this influences the adhesive strength of fiber posts in oval-shaped canals. Thirty (30) oval-shaped canal premolars were randomly divided into 3 groups (n = 10): Group A: rotary desobturation with ultrasonic complement, group B: rotary desobturation without ultrasonic complement and group C: control group. Fiberglass posts were cemented; after 7 days, one-millimeter slices were performed, one of the cervical and another from the middle third of the root. The slices were analyzed under an optical microscope to evaluate remaining gutta percha and effective adhesion area. Samples were subjected to a push-out test to evaluate bond strength of the fiber resin posts. Finally, samples were evaluated microscopically to analyze the type of failure. The results were analyzed using ANOVA, Bonferroni, KruskalWallis and Mann Whitney test (p < 0.05), recording statistically significant differences in bond strength, remaining gutta-percha area and clean walls for adhesion; In addition, to a direct relationship between remaining gutta percha and lower adhesive strength, the ultrasonic preparation of the prosthetic space increases bond strength of fiber posts in oval canals.

Endodontic sealers and post-endodontic waiting time affect the bond strength of the fiber posts / Cimentos endodônticos e tempo de espera após endodontia afeta a resistência de união de pinos de fibra

Introduction: The resistance adhesive of a fiber post can be affected by several factors, such as the endodontic sealer and post-endodontic waiting time. Objective: The aim of this study was to evaluate the effect of different endodontic sealers and two different post-endodontic waiting times on the bond strength of fiber posts. Material and method: Seventy-two bovine teeth were endodontically treated and filled using three endodontic sealers: eugenol-based, epoxy resin-based, or mineral trioxide aggregate-based. The specimens were stored at 37°C for 24 hours or for 30 months. After the respective storage times, the root canals were prepared for luting fiber posts using RelyX U200. Push-out tests and analysis of failures were performed. The push-out data were analyzed by two-way analysis of variance to compare the effects of the endodontic sealer and with the t-test to compare the effects of post-endodontic waiting time. Result: The AH Plus sealer yielded the highest bond strength values at 30 months post-endodontics (11.26 Mpa) (p < 0.05), however no had difference with Endofill sealer at the same time. Endofill and MTA Fillapex sealers did not differ significantly in their effects, irrespective of the post-endodontic waiting time. Conclusion: In conclusion, the endodontic sealer used and post-endodontic waiting time affect the adhesive resistance of fiber posts. The adhesion increases significantly when the fiber post is cemented 30 months after the root canal filling, while the adhesion is reduced when cementing immediately after root canal treatment, in particular for eugenol-based endodontic sealers.

Introdução: A resistência de união de um pino de fibra pode ser afetada por vários fatores, como o cimento endodôntico e o tempo de espera pós-endodontia. Objetivo: Avaliar o efeito de diferentes cimentos endodônticos e dois tempos de espera pós-endodontia na resistência de união de pinos de fibra. Material e método: Setenta e dois dentes bovinos foram tratados endodonticamente e obturados usando três cimentos endodônticos: à base de eugenol, à base de resina epóxia ou à base de mineral trióxido agregado. Os espécimes foram armazenados a 37 ° C por 24 horas ou por 30 meses. Após, os canais radiculares foram preparados para cimentação dos pinos de fibra usando o RelyX U200. Foram realizados testes de push-out e análise de falhas. Os dados foram analisados por análise de variância bidirecional e com o teste t. Resultado: O cimento AH Plus obteve os maiores valores de resistência de união aos 30 meses pós-endodontia (11,26 Mpa) (p <0,05), no entanto, não houve diferença com o cimento Endofill no mesmo tempo. Os cimentos Endofill e MTA Fillapex não diferiram significativamente em seus efeitos, independentemente do tempo de espera pós-endodontia. Conclusão: O cimento endodôntico utilizado e o tempo de espera pós-endodontia afetam a resistência adesiva dos pinos de fibra. A adesão aumenta significativamente quando o pino de fibra é cimentado 30 meses após a obturação do canal radicular, enquanto a adesão é reduzida ao cimentar imediatamente após o tratamento do canal radicular, principalmente para cimentos endodônticos à base de eugenol.

Can the size and the luting material influence in the bond strength of the fiberglass post to dentin? / O comprimento e o tipo de cimento podem influenciar na adesão do pino de fibra de vidro a dentina?

Aim: To evaluate the influence of lengths and different luting agents on the bond strength of fiberglass posts' adhesion to dentin.Methods: Sixty single-root bovine teeth were endodontically treated and included in polyether and acrilyc resin to simulate a periodontal ligament. These were divided into 6 groups according to the post lengths (6, 10 or 14 mm) and luting agents (self-adhesive dual resin cement ­ U; or etch-and-rinse dual resin cement ­ A): U6, U10, U14, A6, A19, and A14. All fiberglass posts were cemented according to manufacturer instructions. After this, mechanical aging was performed (1.2x106 cycles; 4 Hz, 90 N). The push-out specimens were then conducted (2.0 ± 0.1 mm), with the test executed in a universal machine (10 kgf at 0.5 mm/min). Data obtained were submitted to the Kruskal-Wallis and Dunn's test. Results: No statistically significant difference was observed in bond strength between the groups due to the type of luting agent (p > 0.05). However, the isolated post-length factor showed significantly different results for the U groups (p < 0.05). The U10 group showed similar union values to U6 but statistically inferior to U14. Conclusion: bond strength of fiberglass posts of the same length as the dentin presented no differences according to the luting agent, but the post-length property influenced the bond strength when self-adhesive resin cement was used.

Objetivo: avaliar a influência dos agentes cimentantes e dos diferentes comprimentos de pinos na resistência de união de pinos de fibra de vidro a dentina. Métodos: Sessenta dentes bovinos uniradiculares tiveram a raiz endodonticamente tratada, e foram incluídos em poliéter e resina acrílica para simular o ligamento periodontal. Os espécimes foram divididos em seis grupos de acordo com o comprimento dos pinos (6, 10 ou 14mm) e dos agentes de cimentantes (cimento resinoso dual autoadesivo (RelyX U200, 3M ESPE) - U; ou cimento resinoso dual convencional (AllCem Core, FGM) - A: U6, U10, U14, A6, A19 e A14. Todos os pinos de fibra de vidro foram cimentados conforme as recomendações do fabricante. Após, o envelhecimento mecânico (1,2x106 ciclos; 4 Hz, 90 N) as amostras foram fatiadas para o teste de push-out (2,0 ± 0,1 mm) executado em uma máquina de ensaio universal (10 kgf a 0,5 mm/min). Os dados foram submetidos ao teste de Kruskal-Wallis e Dunn. Resultados: não houve diferença estatística na resistência de união entre os grupos devido ao tipo de agente cimentante (p > 0,05), mas houve para o comprimento dos pinos dos grupos U (p < 0,05). O grupo U10 apresentou valores de união semelhantes a U6, mas estatisticamente inferiores ao U14. Conclusão: a resistência de união dos pinos de fibra de vidro de um mesmo comprimento não apresentou diferenças mesmo quando cimentados com cimentos diferentes, mas o comprimento dos pinos isoladamente influenciou quando o cimento resinoso autoadesivo foi utilizado.

Pretratamiento y mejoría de la fuerza de unión de los cementos autoadhesivos de resina a los postes / Pretreatment and improvement of bonding strength of self-adhesive resin cements to posts

ABSTRACT Introduction: Posts and core are frequently used in endodontically treated teeth with excessive loss of coronal tooth structure. Objective: To evaluate the effectiveness of self-adhesive cements under different pre-treatments of dentin in the resistance to extrusion of fiberglass posts. Methods: An experimental in vitro study was conducted. The randomly selected sample was 56 extracted bovine incisors with mature apices and without root curvature. Before the cementing procedure, pretreatment of dentin was performed with 11.5 percent polyacrylic acid, 17 percent EDTA or sodium hypochlorite. The type of failure between the post/cement/dentin was evaluated by stereomicroscope. Two hundred and sixteen bovine dentin discs were used. The disks were approximately 1 mm thick, and were obtained from 72 bovine roots restored with intraradicular retentions. Data were analyzed for better comprehension in an SPSS database for Windows version 15. Results: The highest values were found in groups G3, G4 and G5, and there was no bond strength significant difference in group G2. Conclusions: The pre-treatment had no effect on dentin bond strength, and the self-adhesive cement RelyX U100 appears to be a viable option in the cementation of fiber posts(AU)

RESUMEN Introducción: Los postes y el núcleo se utilizan con frecuencia en los dientes tratados endodónticamente con una pérdida excesiva de la estructura dental coronal. Objetivo: Evaluar la efectividad de los cementos autoadhesivos bajo diferentes pretratamientos de dentina en la resistencia a la extrusión de postes de fibra de vidrio. Métodos: Se realizó una investigación experimental in vitro en 56 dientes de ganado seleccionados al azar con cierre apical maduro y sin curvaturas radiculares. Antes del procedimiento de cementación, se llevó a cabo el pretratamiento de la dentina con 11,5 por ciento de ácido poliacrílico, 17 por ciento de EDTA o hipoclorito de sodio. El estereomicroscopio evaluó el tipo de falla entre el poste / cemento / dentina. Se usaron 216 discos de dentina bovina. Los discos tenían aproximadamente 1 mm de espesor y se obtuvieron de 72 raíces bovinas restauradas con retenciones intrarradiculares. Los datos se analizaron para una mejor comprensión en una base de datos de SPSS para Windows versión 15. Resultados: Los valores más elevados fueron encontrados en los grupos G3, G4 y G5 y no fue significativa la prueba de resistencia en el grupo G2. Conclusiones: El pretratamiento no tuvo efecto sobre la fuerza de unión dentinaria, y el cemento autoadhesivo RelyX U100 parece ser una opción viable en la cementación postes de fibra(AU)

Comparación de la fuerza de unión y la integridad marginal con compuestos de resina de relleno masivo y compuestos indirectos / Comparing bond strength and marginal integrity with direct bulk-fill resin composites and indirect composites

ABSTRACT Introduction: The clinical longevity of tooth restoration -whether directly or indirectly using composites- greatly depends on the quality and stability of the marginal adaptation. Even today, dental restoration failure is a major complication in everyday dental practice. Objective: To evaluate the effect of restoration techniques on the microtensile bond strength and marginal integrity of class II cavities. Methods: An experimental in vitro investigation was made. Preparations (5 × 4 × 2 mm) below the cement-enamel junction were performed in 45 human maxillary premolars (n= 15) that were the sample of the study selected to random. The G1 group incrementally received Spectrum TPH3 Dentsply De trey in three horizontal incremental layers. The G2 group received a bulk restoration technique (one 4-mm increment of Surefill SDR flow plus one 1-mm horizontal capping layer of Spectrum TPH3 Dentsply De trey using a metal matrix band. For the G3 group, impressions were made from each cavity preparation, and Spectrum was used to complete an indirect composite restoration. After storage (24 h/37 °C), the proximal surfaces of each tooth were polished with Sof-Lex disks. For microtensile bond strength testing, all premolars were sectioned into resin-dentine beams (0.8 mm2) and were tested under tension (0.5 mm/min). Results: Microtensile bond strength testing and marginal integrity values were not statistically significantly affected by the type of restoration technique used (p> 0.05). Conclusions: The Surefill SDR flow that used a capping layer made of conventional composite can be an alternative to reduce procedure durations as well as additional steps in the restorative technique(AU)

RESUMEN Introducción: La longevidad clínica de una restauración dental -utilizando compuestos bien directa o indirectamente- depende en gran medida de la calidad y la estabilidad de la adaptación marginal. Incluso hoy en día las restauraciones dentales fallidas constituyen una importante complicación en la práctica dental cotidiana. Objetivo: Evaluar el efecto de las técnicas de restauración en la fuerza de unión microtensil y la integridad marginal de las cavidades clase II. Métodos: Se llevó a cabo una investigación experimental in vitro. Se realizaron preparaciones (5 × 4 × 2 mm) por debajo de la unión cemento-esmalte en 45 premolares maxilares humanos (n= 15), los que constituyeron la muestra aleatoria del estudio. El Grupo G1 recibió incrementalmente Spectrum TPH3 Dentsply (De Trey) en tres capas horizontales incrementales. El Grupo G2 recibió una técnica de restauración masiva (un incremento de 4-mm de flujo de SureFil SDR más una capa de tapado horizontal de 1-mm de Spectrum TPH3 Dentsply (De Trey) utilizando una banda matriz metálica. En el Grupo G3 se realizaron impresiones de la preparación de cada cavidad, y se usó Spectrum para completar una restauración indirecta con compuesto. Después del almacenamiento (24 h / 37 °C), se pulieron las superficies proximales de cada diente con discos Sof-Lex. Para evaluar la fuerza de unión microtensil, todos los premolares fueron seccionados en haces de resina-dentina (0,8 mm2) y fueron examinados bajo tensión (0,5 mm/min). Resultados: Las pruebas de fuerza de unión microtensil y los valores de integridad marginal no fueron afectados significativamente desde el punto de vista estadístico por el tipo de técnica de restauración utilizado (p> 0,05). Conclusiones: El flujo de SureFil SDR que emplea una capa de tapado hecha de compuesto convencional puede ser una alternativa para reducir la duración del procedimiento, así como los pasos adicionales de la técnica de restauración(AU)

Glass fiber post treatment - does it influence resin cement bond strength? / Pinos de fibra de vidro pós tratamento - influencia a resistência de união do cimento resinoso?

Abstract Introduction Glass-fiber posts are used in order to improve the retention of restorations in endodontically treated teeth. Objective To evaluate the bond strength of glass-fiber posts submitted to different surface treatments and cemented to the root canal dentin with self-adhesive resin cement. Material and method Thirty roots of human canines were prepared and divided according to two factors: surface treatments (silane, 35% hydrogen peroxide, or sodium bicarbonate) and root thirds (cervical and middle thirds). The glass-fiber posts were cemented with self-adhesive resin cement (RelyX U200). After 24 h, the specimens were prepared for microtensile bond strength test (hourglass format), fracture pattern and micromorphological assessment by scanning electronic microscopy, in order to measure the cement line. Result The data (MPa and µm) were submitted to two-way ANOVA and Tukey's test (α = 5%). The surface treatments influenced the bond strength of the posts cemented with self-adhesive resin cement (p<0.00). The mean bond strength (standard deviations) differed according to the region of root dentin (p<0.00): the cervical region (Control: 19.16MPa (3.71); Silane: 25.65MPa (4.04); Hydrogen peroxide: 24.43MPa (3.16); Sodium bicarbonate: 37.42MPa (8.27)) showed higher bond strength values than the middle third of the root (Control: 14.66MPa (4.65); Silane: 12.52MPa (5.03); Hydrogen peroxide: 10.64MPa (3.33); Sodium bicarbonate: 10.87MPa (2.49)). Conclusion Treatment of the glass-fiber post surface with chemical and physical agents increased the bond strength of the cement-post-dentin interface in the cervical third and the treatment with Sodium bicarbonate showed better results in bond strength.

Resumo Introdução Pinos de fibra de vidro são utilizados para melhorar a retenção das restaurações em dentes tratados endodonticamente. Objetivo Avaliar a resistência de união de pinos de fibra de vidro submetidos a diferentes tratamentos superficiais e cimentados à dentina radicular com cimento resinoso autoadesivo. Material e método trinta raízes de caninos humanos foram preparadas e divididas de acordo com dois fatores: tratamentos de superfície (silano, peróxido de hidrogênio a 35% ou bicarbonato de sódio) e o terço radicular (cervical e médio). Os pinos de fibra de vidro foram cimentados com cimento resinoso autoadesivo (RelyX U200) e foram divididos de acordo com duas regiões: cervical e terço médio. Após 24 horas, foram preparados para microtração (formato de ampulheta), padrão de fratura e avaliação micromorfológica por microscopia eletrônica de varredura, para medir a linha de cimento. Resultado Os dados (MPa e µm) foram submetidos à ANOVA two-way e teste de Tukey (α = 5%). Os tratamentos de superfície influenciaram a resistência de união dos pinos. A média da resistência de união (desvio padrão) diferiu de acordo com a região da dentina radicular (p <0,00): a região cervical (Controle: 19,16Mpa (3.71); Silano: 25,65MPa (4.04); Peróxido de hidrogênio: 24,43MPa (3.16); Bicarbonato de sódio: 37,42MPa (8.27)) apresentou valores de resistência a raiz (Controle: 14,66MPa (4.65); Silano: 12,52MPa (5.03); peróxido de hidrogênio: 10,64MPa (3.33); bicarbonato de sódio: 10,87MPa (2.49)). Conclusão O tratamento com agentes químicos e físicos aumentou a resistência de união da interface cimento-pino-dentina no terço cervical e o tratamento com bicarbonato de sódio apresentou melhores resultados na resistência de união.